Magnetic Latches

Material:

ABS Resin + TPE Resin

Features:

1. The magnetic lock is safer and more attractive;

2. No drilling or tools for installation;

3. Flexible and soft TPE (plastic) straps completely work well on flat or around corners;

4. 3M foam adhesives to install in one minute;

To Use:

1.Clean the preset spots where you need to install. Measure the spots before installation to install it correctly at once;

2.Remove out the Part A. (Fig 1);

3.Please adjust the suitable length and cut it;

4.Assemble the Part A back and lock. The Part A cannot push out anymore once locked (Fig 2);

5.Peel off both sides of the 3M adhesive, firmly push it to your preset spots (Fig 3);

6.Give 24 hours rest after installation to strengthen the adhesive;

7.Use the Magnetic Key to open the lock (Fig 4).

Tips for Removing

1. Remove by heating up for some minutes with a hair dryer and release the mounted object;

2. Use a piece of dental floss or wire, held tautly between two hands. Pull back and forth, to split the foam, and release the mounted locks;

3. Remove the remaining material with citrus cleanser.

Cautions:

1.Those items are not toys. Please do not allow children to mouth or chew it.

2.Please do not use it once it got any damage.

3.Please notice this product CANNOT take place of adults’ guard and cares.

4.Once the 3M tape is installed, please do not remove it to re-install.